Adhesive Dog Ear Posting Patches

Skip bulky external posts and separate bottles of liquid glue. This Dog Ear Posting Support Patch Kit uses contoured, self-adhesive patches that sit inside the ear flap to provide temporary external positioning support during supervised wear.

Features

• Peel-and-place application: the patches include a self-adhesive backing, so no separate liquid glue is required.
• Low-profile inner-ear placement: provides a discreet alternative to large external posts or bulky full-ear wrapping.
• Contoured patch shape: rounded edges and a raised center ridge follow the usable inner-ear area.
• Measurement-based sizing: choose from 7 sizes based on the actual inner-ear length and width.
• Complete accessory set: every kit includes the main patches, auxiliary strips and prep swabs.
• Flexible pack quantities: select 1, 2, 3 or 5 kits depending on your replacement and backup needs.

What Is Included in One Kit?

• 1 pair of coffee-brown main ear support patches - 2 pieces
• 8 rectangular auxiliary support strips
• 4 prep swabs
• 1 neutral storage box

Multi-kit selections include the same contents multiplied by the number of kits ordered.

Choose the Size by Measurement

Measure the usable inner-ear area before ordering. Measure from the base toward the tip for length, then measure the widest usable point for width. Keep all measurements outside the ear canal.

Do not select a size by breed or age alone. Dogs of the same breed may have different ear proportions.

Suggested Application Steps

1. Measure: choose a patch that fits within the usable inner-ear area without covering the ear opening.
2. Prepare: make sure the external inner-ear flap is clean, completely dry and free from oils, moisture and loose debris.
3. Peel: carefully remove the white release liner from the back of the main patch.
4. Position: place the patch inside the ear flap and follow the natural ear contour. Do not insert the patch into the ear canal.
5. Secure gently: use an auxiliary strip around the lower ear area only when needed. Never wrap tightly.
6. Inspect regularly: monitor the ear and skin throughout wear and remove the patch if discomfort or irritation appears.

How to Use

Follow the steps below for proper application. For best adhesion, always apply the patch to a clean, completely dry ear flap and check your dog's ears regularly during wear.

Step 1 — Keep Your Dog Calm & Secure

Place your dog in a stable, comfortable position and gently keep them still while working around the ears. If needed, have another person calmly assist you during application.

Step 2 — Clean & Completely Dry the Ear Flap

Gently clean the visible inner surface of the ear flap using the included prep swab. Wipe away surface oils, dirt and loose debris from the area where the patch will be applied.

Allow the ear flap to dry completely before applying the patch. A clean, dry surface helps the adhesive stay securely in place.

Important: Clean only the visible ear flap. Do not insert the prep swab, patch or any other object into the ear canal.

Step 3 — Apply the Main Ear Support Patch

Gently lift the ear into its natural upright position and smooth the inner ear flap so the application area is flat and free from folds.

Peel off the white release liner from the back of the coffee-brown ear support patch. Position the patch lengthwise inside the ear flap, following the natural shape of the ear.

Press the patch gently and evenly against the inner ear flap to help it adhere securely.

Make sure the patch stays on the ear flap and does not cover, block or enter the ear canal opening.

Step 4 — Secure the Ear Base Gently

If additional support is needed, use the included auxiliary adhesive strip around the lower ear area to help stabilize the ear and reduce unwanted movement.

The strip should be secure enough to stay in place, but never wrap or tighten it excessively. The ear should not appear pinched, compressed or swollen.

After application, check that the ear remains comfortably upright and that the ear opening is still clearly unobstructed.

Step 5 — Remove & Replace After 3 Days

Each main ear support patch and auxiliary adhesive strip is designed for single use only.

Remove the applied patch after 3 days of wear and replace it with a new patch if continued support is needed.

Once a patch or auxiliary strip has been removed, discard it immediately. Do not reapply, reposition or reuse a previously worn patch or strip, even if some adhesive remains.

If the patch becomes loose, wet, dirty, contaminated or starts peeling before the 3-day period is complete, remove it and replace it with a new, unused patch.

Before applying a replacement patch, gently clean the visible inner ear flap again and allow the skin to dry completely.

Single-Use Reminder

• Maximum wear time for one patch: 3 days.
• One patch = one application only.
• Do not reuse a patch after it has been removed.
• Do not transfer a used patch from one ear to another.
• Do not use a previously worn patch on another dog.
• Always use a new patch when reapplying.

Important Use & Safety Information

• For temporary external ear-position support only.
• Use under supervision.
• Use only on clean, dry and fully healed skin.
• Do not apply over open wounds, stitches, redness, swelling, discharge or irritated skin.
• Do not insert the patch or prep swab into the ear canal.
• Keep the ear canal opening unobstructed at all times.
• Never wrap the auxiliary support strip tightly around the ear.
• Keep the patch as clean and dry as possible during wear.
• Check the ear and surrounding skin regularly during use.
• Remove the patch immediately if your dog shows persistent scratching, unusual head shaking, swelling, redness, pain or other signs of discomfort.
• If you notice unusual discharge, strong odor, significant redness or signs of pain, discontinue use and consult a veterinarian.